Hazards and Safety Considerations to Remember When 3D Printing: 2020 Safety Measures

We use 3D printing for quite a long amount of time. They are used in almost each and every industry as well as business. We see 3D printers being used in garages, schools, universities, industries, shops, and a number of other places. In spite of being very much helpful, it is after all an electrical device. Thus, there are both proper as well as improper ways of using the 3D printer. So here we mention 3d printing safety rules to protect you from any danger.

This specific article aims not to go into the debate of whether 3D printing is harmful or not. We are going to list together a few of the important reasons which would help to identify the proper measures and 3d printing safety concerns. To make the whole blog look systematic, we would group together all the important points about safety considerations of 3D printing in a proper manner.

Hazards and Safety Considerations to Remember When 3D Printing: 2020 Safety Measures

3d Printing Safety Rules:

Chemical Fumes And Ultra-Fine Particles

The reactivity of filaments to emmisions of harmful chemicals could differ from filament to filament-some may discharge poisonous gases and others may have more sinister emission levels. The emmisions of super-fine plastic particles, even so, is a simple mechanical process which takes place irrespective of the filament material utilised.

We deem the most dangerous risk involved with 3D printing to also be the gas-borne dangers. While certain chemical compounds are easy to identify from their scent, our olfaction senses make hyper-fine particles practically opaque and untraceable. This encourages falling into the trap of becoming complacent with security precautions.

In 3D printing, what renders breathing dangers especially unsafe is that they are mostly performed in a workspace or home environment, where there are practically no safety requirements. This is among the few unintended effects of an extremely DIY-friendly 3D printing operation. To stop the long-term health consequences of breathing these by-products of 3D printing, here are some of the steps that you should undertake.

Hazards and Safety Considerations to Remember When 3D Printing: 2020 Safety Measures

Print In A Room Which Has Proper Ventilation

Usage of the 3D printer in a space with decent airflow is the best safety step to take. If you have a window, make it as big as possible so clean air still floods into the space. It would be easier to have an exhaust fan but not essential. It will be better to provide an air circulation extraction system or exhaust fan – please make careful to remember the size of the space when choosing the necessary devices.

Wear Proper Breathing Protection

It would be better not to stay in the very same space as your 3D printer, particularly because it can require multiple hours to finish. If you need to be nearby to track the progress or adjust the printer, then we urge you to wear protective respiratory cover. Bear in mind when buying a ventilator mask that you will need coverage from two things: toxic contaminants and hyper-fine particles. We recommend purchasing a durable half-face respirator mask and a reserve of refill kits.

Air Purifier With A HEPA Filter

If your house doesn’t have adequate ventilation the next greatest thing would be to have an air purifier with a Filtration system. Only remember that even a HEPA philtre is helpful just to remove fine particles from the air. The purifier will also need to have an activated carbon phase for removing odours and toxin gases. Besides purifying the air from unwanted materials, an air filter also encourages the flow of air.

Have A Proper Closure Of Print Chamber

Some few portable 3D printers were equipped for manufacturing chamber with either a fixed or reversible frame. This is often followed much of the period by it’s own air filter with a HEP pump. This provides multiple goals – eliminating particulate matter in combustion air and preserving high temperatures within the building room. The only drawback is that such devices are much more costly too.

Heat And Fire

3D printing requires a heating system to heat the plastic material to achieve levels around 150 C and 200 C somewhere. Products with covered print sheets often warm up the bed to temperature above 100 C. Taking these temperature values into consideration, it is simple to see how flame threat is still possible while doing 3D printing.

There’s no full overview of the heat dangers unless mentioning the risk of combustion. Roughly all products have temperatures of auto-ignition. Given the high levels the materials achieve when 3D printing, it will be wise to hold away materials which are easy to fire, including sheet. Then there is the possibility of electric fire if the cables as well as other electronic devices are subjected to conditions above their intended function.

Heated Parts Should Be Marked With Stickers

If you are using 3D printing to teach or practice, that implies not even all 3D printer consumers can be professional with it or realize which sections get really heated throughout activities. It will be better to put clearly noticeable logos as danger signs, to alert everybody. It might not be necessary to place a label precisely on the funnel but it should be appropriate to position it irrefutably noticeable somewhere.

Use Gloves While 3D Printing

You will never need to touch any component of a 3D printer throughout 3D printing during optimized conditions, when it’s still hot. And then after printing is done, it’s safer to let the printing pad drop back to room temperature and end printing. Make sure you wear a set of neoprene gloves for heat control should this be required.

Protect Sensitive Electronics

During 3D printing, the electronic equipment of a 3D printer is designed to survive the extreme temperatures which the heating system of the printer would achieve. Yet heat transfer also plays an enormous role in maintaining the devices secure and safe. If you are DIYing a room structure to cope with warping issues, this is something you will need to remember. And besides, not many of a printer ‘s amenities can stand up to maintaining it heated inside an envelope for even more than 10 hours. Burnt cable wiring will quickly cause electric fires.

Have a Fire Extinguisher Handy

As in any proper manufacturing operation, having a fire extinguisher around while 3D printing is often a smart idea. Ensure a Class D fire extinguisher is available. It is an extinguisher built on powder that is intended to douse fires containing combustible metals, that can touch extreme temperatures.

Mechanical Hazards and Moving Parts

Hazards and Safety Considerations to Remember When 3D Printing: 2020 Safety Measures

Most of a 3D printer’s working components during 3D printing are either concealed enough just to present no harm, or generating so minimal tension that perhaps the hazards they present are small. The stepper motors that regulate the 3D printing lateral movement and the filament extrusion are nevertheless strong enough just to catch the fingertips of a human. Integrate the risk of having your fingers trapped with the high-temperature nozzle and you’ve got a frightful burning formula.

Before Any Adjustments, Disengage The Stepping Motors

If you really need to shift the printing carrier or detach the material physically from the extrusion unit, the very first step you have to do is turn off the stepper motors from control. It not only means that fingertips are not stuck in the engines but it also makes the experience much simpler.

Help Children While They Use 3D Printers

Kids and pieces on the move are a poor mix. If you are using 3D printing as an interactive method, this is what you’ll need to hold in mind. Kids are incredibly curious and adventurous to the extent of being injured. This is where you are supposed to move in-the adult.

Keep Long Hair Away

Long and messy hair is one other thing to stay away from movable pieces. For all engineering areas which mean working with machine components, this is pretty much common practice. Whether you, your apprentices or your learners have long hair, keeping it in a comfortable bun or only wearing a hairnet would be better.

High Voltage

As for every electrical unit, the possibility of electrocuting oneself with a driven-up 3D printer is still there. Luckily all 3D printers are powered at just 12V/24V. But with that volts you may get a pulse, it should not be enough to cause serious damage. Such electrical-related risks refer to the risk of fire hitting wires and devices, as we previously discussed.

Maybe the most significant safety measure is to ensure the 3D printer’s power source is turned off once you pull it out. If you end up being into 3D printing for a long period of time, this is something that you are expected to be doing.

Buying Guide

3D printer head
  • Best Features: The printer you are about to purchase should have latest skills. Both the latest and the safest options must be accessible.
  • Proper Resolution: The 3D printer you ‘re getting must have good resolution. For top quality 3D printing that is really necessary.
  • Know the thing before printing: Do make sure that you have a good picture of what you are sending out. This is among the most critical factors of purchasing a 3D printer.
  • Price: Price is also an important factor. A number of options are available and all in the affordable range.

Frequently Asked Questions

Is it worth it to buy a 3d printer?

3D printing is great but for all it’s just not worth it. Most individuals waste a lot of money on 3D printers when just exporting a few pieces is really all they can do. Worse still, some people are buying a 3D printer just to figure out they don’t really like using it.

How much does a decent 3d printer cost?

For just $1,000, you can get very powerful 3D printers, but costs are much smaller for devices that target beginners, learners and adventurers for home printing. Entry-level costs for 3D printers are currently under $300.

Can you make money with a 3d printer?

One of the best ways to make money using a 3D printer is by using the device as a business service or selling products made with it. Here, you can mark your 3D printer as a business, then accept requests and get charged for the products you make.

How hard is it to get into 3d printing?

Needless to mention, 3D printers are not difficult for a novice to master, but they are cranky and hard to manage, sometimes struggle and involve plenty of practice.. You do projects like Blender or 3D Lab in a 3D modelling application.

Is it safe to run 3d printer overnight?

You shouldn’t leave unsupervised your 3D printer when printing, since it’s not secure. 3D printers will require several hours to finish the printing, sometimes more than a day.


It can be pretty safe to describe that 3D printing has very much got in to every business nowadays. It is very much cheap and is extremely easy to use. But still there are safety considerations that need to be addressed. Here, you will get all the important points regarding 3D printer and various other points that needs to be properly taken care of.

Have Any Questions? Talk to our support team here.

Reset Password
Compare items
  • Total (0)
Shopping cart