Digital Oscilloscope Kit with ARM Cortex-M3 processor and TFT Screen
Note: This kit is fully soldered. But the diy case is not fully Assembled. The diy case must be assembled by yourself.
This digital oscilloscope kit adopts an ARM Cortex-M3 processor and with 2.4-inch TFT screen and protective case. It’s easy and reliable for circuit operation. It can display waveform parameters, such as frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.
Adopt ARM Cortex-M3 processor (STM32F103C8), and include a 2.4-inch color TFT display screen.
Used for secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.
Come with instructions, easy to install and operate.
With Auto/Normal/Single trigger modes, easy to capture the moment waveform.
Available rising or falling edge trigger.
Observable previous waveform before trigger(negative delay).
Can freeze waveform display at any time(HOLD function).
With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.
Waveform storage function: will not lose the waveform after power off.
Short-circuit and open-circuit detection: can help the user find out the soldering error.
TFT controller recognition function.
The SMD has been soldered, more suitable for electronic beginners.
Maximum Real-time Sampling Rate: 1MSa/s
Analog Bandwidth: 0-200KHz
Sensitivity Range: 5mV/div-20mV/idv
Maximum Input Voltage: 50Vpk (1X probe)
Input Impedance: 1M ohms/20pF
Accuracy: 12 Bits
Record Length: 1024 points
Coupling Modes: DC / AC / GND
Time Base Range: 500s/Div – 10us / Div
Trigger Modes: Auto, Normal, and Single
Trigger Position: Center of Buffer
Supply Voltage: DC 9V(8-10V)
Current Consumption:~120mA @ 9V
Main Board Size: 94 * 65mm / 3.7 * 2.56in
Analog Board Size: 65 * 47mm / 2.56 * 1.85in
Screen Size: 52 * 40mm / 2 * 1.57in
Additional Information: Digital Oscilloscope Kit with ARM Cortex-M3 processor and TFT Screen
Shipping And Payment
There are two key factors which will affect the time you receive your items.
- Processing Time: After receiving your order, we need some time to test the product to ensure its quality. The exact processing time varies depending on the item. The average processing time is 3 working days. but this can also be affected by the item’s stock status. For small quantity orders, the processing time is 1-3days while larger quantity orders may take up to 2-5days.
- Shipping Methods:
|Warehouse||Estimated Shipping Time|
|US Warehouse||3 – 9 Days|
|EU Warehouse||3 – 11 Days|
|Australia Warehouse||3 – 11 Days|
|China Warehouse||6 – 15 Days|
Payments: xPita.com accepts payments via all the secure methods. Such as PayPal, credit and debit card.
If you have any questions regarding the Shipping or Payments. Please contact us here.
$39.52 – $48.44