- 38%

FLYING BEAR Ghost 4S FDM Metal 3D Printer

(64 customer reviews)

$796.00 $493.00

  • BMG Dual Drive Extruder system combines high performance and resolution with low weight. Excellent thermal performance and prints Flexible filament.
  • 32 Bit Motherboard to achieve near silent operation.
  • The board has an automatic cooling fan to help keep itself cool and a separate MOS module, allowing for stable prints even at high printing speed .Equipped with a touchscreen and Wifi connection, It can resume printing from a breakpoint, save under power failure, detect filament failure, and automatically turn off after printing is complete. All in all, it’s pretty much all you can ask for from an operating system.
  •  Printer Z shaft screw adopts Anti backlash spring and end bearing will be easily pre-loaded to eliminate backlash & fix the heated bed firmly to achieve high precision. Smooth movement over full travel range. Longer life.
  •  The ideal surface for 3D printing, Sticky coated glass platform can be rapidly heated and cooled. Sticky coated glass platform is resistant to thermal shock as well as thermal expansion. It is extremely flat and it will help ensure the leveling of your bed stays consistent print after print. Easy removal and clean-up.

  Ask a Question
SKU: 32868752710

$796.00 $493.00

(-38%)

Out of stock

Free Shipping

Get free shipping across the globe.

Affordable Pricing

Factory direct prices for maximum savings.

Premium Support

Pre & Post Sales customer support.

below atc
Add to wishlistAdded to wishlistRemoved from wishlist 1
Add to compare

FLYING BEAR Ghost 4S FDM Metal 3D Printer

Newest Design 3D Printer With PLA/ABS/Wood/HIPS 4 Material Type

  • Printer can connect to WiFi, and it is more convenient to print with wifi.
  • Printing is made of 1.5-3mm sheet metal, and the frame structure is very stable.
  • Printer adopts 3.5 inch color touch screen, larger screen to make operation more convenient and simple
  • Printer adds a filament loss resume function, printing process donrsquot need to worry about filament exhausted and print failure.
  • Printer adds a power loss resume function so that you don’t have to worry about a sudden power cut.
  • Printer Z shaft screw adopts anti backlash spring and end bearing to make the hot bed running more stable and improve the printing quality
  • The parts of printer 90% have been completed and only need 10 minutes to complete the installation.
  • Printer adapts 300W 24V power supply, so that the printer can be maintained for longer printing time.
  • Printer has a larger print volume of 255x210x210mm.
  • Free gifts such as SD cards, filament, idlers, Teflon pipes, et
  • Print size:255*210*210mm
  • Printer size:392*342*420
  • Layer thickness precision: 0.05-0.3
  • MAX printing speed: 150 mm/s.
  • Ghost 4 Material type: PLA,ABS,Wood,HIPS .
  • Ghost 4s Printing materail type : TPU,PLA,ABS,WOOD,HIPS
  • Material specifications :1.75mm in diameter.
  • Positioning accuracy: Z 0.002mm, XY 0.01mm.
  • Nozzle diameter: 0.4mm
  • Recommended extruder temperature: 220degC (the max 260degC).
  • Hot bed temperature: 60-110degC .
  • Extruder number: 1
  • Power requirements: 24V, 300W
  • Connectivity: WiFi,SD card,USB
  • Input file format: STL , OBJ , DAE , AMF
  • Output file format : GCode,JZG
  • Compatibility: Windows, Mac.
  • Control software: Repetier-host,Cura.
  • Machine weight: 15kg

Newest Design 3D Printer With PLA/ABS/Wood/HIPS 4 Material Type

Newest Design 3D Printer With PLA/ABS/Wood/HIPS 4 Material Type

Newest Design 3D Printer With PLA/ABS/Wood/HIPS 4 Material Type

Newest Design 3D Printer With PLA/ABS/Wood/HIPS 4 Material Type

Newest Design 3D Printer With PLA/ABS/Wood/HIPS 4 Material Type

Specification: FLYING BEAR Ghost 4S FDM Metal 3D Printer

Brand Name FLYING BEAR
Model Number FLYING BEAR Ghost4S
CE Certification Yes
Color Print Speed 150mm/s
Max print size 255*210*210mm
Hot bed size 270*210mm
Printer size 392*342*420mm
Connectivity WiFi,SD Card,USB
Layer thickness 0.05-0.3mm
Extruder Temperature Max 260 Degree Celsius
Hot bed temperature 60-110 Degree Celsius
Print material PLA,ABS,Wood,HIPS
Printing Technology FDM (Fused Deposition Modeling)
XY-axis positiong accuracy 0.012mm
Z-axis positioning accuracy 0.004mm

64 reviews for FLYING BEAR Ghost 4S FDM Metal 3D Printer

4.9 out of 5
59
5
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Customer

    Ordered from the Russian Federation, there was a parcel to the Orenburg region about 3 weeks. Assembled, checked, everything works fine! The store is adequate, answered all questions. I recommend the product, but prints slowly (

    Helpful(0) Unhelpful(0)You have already voted this
  2. V***v

    Ordered numbers on October 16, in Russia they were not, took delivery from China. very sorry, because 11.11 they appeared in the Russian Federation and it was possible to get by 15.11, I only received 12.12, including because of the terrible local courier service, which 14 days could not bring the parcel in Moscow. The printer itself collected quickly by video. The general feeling that this is a Chinese, plastic panels stink, the fasteners from Plasticine break down at times. The table should be calibrated after heating, then everything seems to converge. There is a test seal, it looks good for now. For a month already lie on the ready spare parts for conversion to direct, I will do after a couple of Test runs

    Helpful(0) Unhelpful(0)You have already voted this
  3. Z***z

    The printer came in a month while I ordered from the Russian warehouse. Holes for the side covers should be purged because they are in paint. When printing PLA, which comes complete, the detail breaks off the table. I’ll figure it out.

    Helpful(0) Unhelpful(0)You have already voted this
  4. Customer

    It came quickly, packed well. I have not tried it yet.

    Helpful(0) Unhelpful(0)You have already voted this
  5. A***o

    In general, the printer is satisfied, from the moment of payment to receipt from the Russian cattle it was 14 days. The printer came with quiet drivers (I did not check exactly what but I thought 2209 but it was not accurate). The extruder is quality and the holes of the soot, the gears are also of good quality. The first 300 grams of plastic printed on Hurray but with increased rest to 105 percent (laziness was calibrating the feed), but after the start of the long print for about 9 hours and weight under 250 gram in the middle of the print began problems clear shortage plastic, as a result, the seal of marriage began to search for a problem, Namely clogged nozzle how do you think than, and this was a chip from the thread of the nozzle (and in the spare heater was the same). In general, the printer is relatively quiet, but expensive old Ander 3 prints no worse.

    Helpful(0) Unhelpful(0)You have already voted this
  6. Customer

    Does not correspond to the declared price in the picture with a valid when paying. The support service works badly, to the Mail that is listed in the manual, I sent the video 02.12.20, I still have not been answered, today is 13.12.2020.

    Helpful(0) Unhelpful(0)You have already voted this
  7. R***r

    Until you sing the store does not send from the Russian warehouse. The shipping method choose by itself.

    Helpful(0) Unhelpful(0)You have already voted this
  8. Customer

    Super printer

    Helpful(0) Unhelpful(0)You have already voted this
  9. Z***a

    It’s okay. Collected in an hour, later added a backlight, and later, I carried the extruder to the right side for the convenience of filling the filament. To print complex models, I sometimes additionally use my hand fan (holds on a powerful magnet outside the printer frame). My first printer, I’m happy with everything.

    Helpful(0) Unhelpful(0)You have already voted this
  10. S***v

    In general, everything is fine, it came quickly. One of the racks of the case is slightly bent, I think the quality will not affect. Z-axis bearings went with a crash, they were removed, washed in gasoline, lubricated with Lithol, khrust disappeared, but one of the bearings went with a meal, only one way, crossed it, cleaned it, it’s better, but not perfect. Z bearing quality is not very good, there is barely noticeable backlash, inside was metal dust, before installation it is desirable to rinse. On the axes x y drive normally, did not disassemble. The printer collected by video instructions, the trial printing of the screw and nut passed without Adventure, the printing quality is excellent, I’m totally satisfied.

    Helpful(0) Unhelpful(0)You have already voted this
  11. G***a

    All is Well) easy to assemble. The store has a good detailed instruction. Prints, if everything is correct, accurate enough and good. Seller recommend.

    Helpful(0) Unhelpful(0)You have already voted this
  12. N***o

    Unexpected printing quality from the box. Everything’s on the level. This is my first printer and I did not regret it at all.

    Helpful(0) Unhelpful(0)You have already voted this
  13. E***v

    With a coupon of top brands and red it turned out quite beautiful at a price, OK. 190. Took a colleague. From his words, it took no more than an hour to assemble. Everything works.

    Helpful(0) Unhelpful(0)You have already voted this
  14. Customer

    I came safe! All packed well, son and husband collected, and printed the first trial Bolt in 3 hours. Thank you! Already I’m baking gingerbread-Bulls for the new year.

    Helpful(0) Unhelpful(0)You have already voted this
  15. I***v

    The printer works well… In the stack prints the layer to the layer!)

    Helpful(0) Unhelpful(0)You have already voted this
  16. M***E

    Took on sale, satisfied with the price. The only printer on Ali, at watorogo shipping 50 $, the rest have more than 250 $. So you don’t have to choose. Took a year ago C4 model and was pleased. Difference 5 from C4 is silence, C4 is loud as a first-hand, C5 is ASMR paradise for ears. I recommend taking in an apartment, with 5 you can sleep in one bed) 5 prints neither worse nor better than C4, blowing normal in 5 made. Very satisfied, I recommend it to everyone! Z. S. For some reason, 5 has a more modest set than C4, almost no spare parts, unlike S4.

    Helpful(0) Unhelpful(0)You have already voted this
  17. V***v

    I had to dance with a tambourine to make him work. But still began to print.

    Helpful(0) Unhelpful(0)You have already voted this
  18. N***h

    All norms despite 11.11 fast delivery from the Russian warehouse. Assembly without problems. There was a problem with the table but the store promised to send a new one under warranty.

    Helpful(0) Unhelpful(0)You have already voted this
  19. Customer

    Great printer. Delivered quickly enough.

    Helpful(0) Unhelpful(0)You have already voted this
  20. O***y

    Delivery is fast, the goods fully correspond to the description. When assembling, it turned out that there was no small bolt in the fastening of one of the Z axis guides, until I found something to replace, the bolt is small. The software periodically heals, it is necessary to reboot. Prints norms, it is only necessary to set a quality level and monitor the cleanliness of the table.

    Helpful(0) Unhelpful(0)You have already voted this
  21. A***v

    Everything is super, good printer. This is my first printer, so I still like it, I have to learn to print. The test model was printed well.

    Helpful(0) Unhelpful(0)You have already voted this
  22. Customer

    I came to Kazakhstan for a month. By KZ drive Exline. Packed OK. In the kit there was not enough one hexagon, well, fig with it, its tools are and more convenient, and package with some lubricant. Bad, very bad that there is no paper (well, or at least in PDF) assembly instructions. Only a small book, was surprised that at Russian, with characteristics, a set of delivery and several tips. Instructions for Assembly only in the form of videos on the rear pipe. The video shows that the collector sometimes explains something, but there is no voice. In the first video in general silence, in the rest of the music. Like, sit down, relax, watch vidosik. Fu. In general, not in a hurry and periodically distracted in half the working day collected. From the first time and even, like, right. I did not get out of the projects, I started the “built-in” bolt and nut. The start was normal, and the final did not wait, it was necessary to go on business. I’ll see what happened tomorrow. So, the place ended, the continuation in the additional review.

    Helpful(0) Unhelpful(0)You have already voted this
  23. D***v

    Printer fire! For their money just luxurious) before that there was a эникюбик Cossel liner plus. With tuning, he cost me the same money as the bear, but the functionality remained more poor. In general, I warmly recommend a bear)

    Helpful(0) Unhelpful(0)You have already voted this
  24. M***v

    Collected in half a day. Video instructions. Test Bolt turned out fine, a couple more copies-for 4, but this is my first printer, we still need to calibrate it correctly. From the first time it did not work out to calibrate in zero.

    Helpful(0) Unhelpful(0)You have already voted this
  25. R***r

    Everything is fine, but the order came for 2-3 weeks later than the promised deadline. The supplier says the reason for the delay in covida.

    Helpful(0) Unhelpful(0)You have already voted this
  26. S***v

    Ordered 01.10 from the Russian warehouse, “sent” 20.10 with the left track. In fact, the printer was in stock in Russia in early November, sent only 06.11 via J-net. 09.11 track suddenly accepted the status of “departure not delivered” although no one contacted me. As a result, I had to look for an info about J-net and the printer was discovered in two days by comrades called “Courier Express Service”, which after pinania all the same decided to get it 13.11. I think if I did not contact them, the order would be another week. Total one and a half months from the “Russian” warehouse. The store answers, but there is little sense of it. The printer itself is made soundly, collected in two hours, the test model printed well.

    Helpful(0) Unhelpful(0)You have already voted this
  27. S***v

    It’s fine. This is my first printer. Assembled, configured and launched without problems. Test printing passed on Hurray.

    Helpful(0) Unhelpful(0)You have already voted this
  28. V***v

    Everything is cool, the quality is on top!

    Helpful(0) Unhelpful(0)You have already voted this
  29. D***a

    Took 11.11 Got a version with old drivers. Delivery MSC 4 days. The printing quality from the box is very good. If you plan to bring to mind, immediately order 2209*4 And aprids for direct extruder. Will raise the printing speed by 50% for the technician and be able to adequately turn on the lens advance. Immediately changed to marlinov firmware, the only negative absence of previewing the model and the Russian language. In the rest, much more balanced on speeds and protection. Plastic in the kit is quite suitable. The table cover is not bad, but only if you regularly wipe with alcohol, the fingerprint or dust and the table ceases to hold anything at all. Even clean I recommend to fear skirts on the model. According to the conclusion, a good Kit Kit to bring to mind. Weak blowing (almost zero), very inconvenient location of the extruder and coil, y-axis management cable and from the case to hotend is not the most optimal. The table substrate only leaves 60% of the table, the rest cools reodically.

    Helpful(0) Unhelpful(0)You have already voted this
  30. V***v

    Delivery by courier 37 days. Track wasn’t tracking. Assembled, configured and printed immediately a control bolt with a nut. It’s OK!

    Helpful(0) Unhelpful(0)You have already voted this
  31. H***a

    The product corresponds to the store’s declared information. Packed perfectly. Manual-Book 32 pages With color photos on coated paper. Pleasantly surprised! Delivered in 4 days.

    Helpful(0) Unhelpful(0)You have already voted this
  32. S***r

    Great store ❤ 10 stars ❤ Fast shipping ❤ I recommend ❤ thank you ❤

    Helpful(0) Unhelpful(0)You have already voted this
  33. Customer

    Ordered 11.11.2020. 16.11 courier brought home (Ekaterinburg). Visually everything is whole and in stock.

    Helpful(0) Unhelpful(0)You have already voted this
  34. A***e

    Taken from stock Czech Republic, the free pass from Germany, times really short, about a week, even less, all working and ready to use

    Helpful(0) Unhelpful(0)You have already voted this
  35. V***v

    Very long sent. Ordered on 11.11.2020 and received in early December taking into account delivery from the Russian Federation. Fed with breakfast and assured that the goods are in warehouses in the Russian Federation. Waited, brought by courier to the house. Of the jambs only incorrectly chopped thread of the stepper motor holder on the y axis (in the M5 manual, and in fact m3). Otherwise, everything is fine. The drivers are all quiet, 2208 judging by the appearance.

    Helpful(0) Unhelpful(0)You have already voted this
  36. I***n

    Arrived in 10 days, the quality is excellent.

    Helpful(0) Unhelpful(0)You have already voted this
  37. L***o

    Top!

    Helpful(0) Unhelpful(0)You have already voted this
  38. E***n

    Corresponds to the description. Fast Delivery

    Helpful(0) Unhelpful(0)You have already voted this
  39. V***n

    Very fast delivery to Moscow from a warehouse in Russia (4 days). Packed perfectly. Simple assembly. Earned without problems. Of the immaterial shortcomings-the hexagon 2.5mm was enough exactly for the Assembly, the last stretch with its hexagon produced. In the rest everything is super! I recommend the goods and the store.

    Helpful(0) Unhelpful(0)You have already voted this
  40. A***k

    Everything is on top. You guys are milk! Ordered 11.11 delivered in 5 days. Assembled, adjusted. Everything works!!! Instruction for Russian.

    Helpful(0) Unhelpful(0)You have already voted this
  41. V***r

    Prishol collected printed while everything works fine next will be visible. Somewhere 4 – 5 hours Soberal, as this is my first printer. Sent in a couple of days at customs had to wait. Thanks for the printer.

    Helpful(0) Unhelpful(0)You have already voted this
  42. M***n

    Everything is fine, delivery from the Russian warehouse is less than a week. Packed well, the box is glued or tape or film, so even moisture would be nothing. The printer collected, because. My first printer spent about 3 hours. Recommend before assembling into all threaded joints screw bolts to cut the paint layer on the thread, so it will be faster than holding the detail in the hands of getting into the thread. In general, the assembly is simple, I did according to the instructions from the handpop channel, very briefly and clearly all the steps are described in two videos. Until I printed, I just collected everything. Ahead calibration and first printing. By the way, I got a version only with two tmc2208, and some in the comments on YouTube write, that allegedly already have versions with 4 quiet drivers

    Helpful(0) Unhelpful(0)You have already voted this
  43. D***i

    The printer prints perfectly. Dear Manufacturers, please pay attention to the following point, which took more than half of the time when assembling: the thread in the holes of the vertical racks for fixing the side and back walls is made before dyeing, the paint clots the thread and when assembled there does not climb any screw fastening. The smaller the hole diameter, the more problems with it. You have to remove the paint with hand tools. The hexagons fail, without withholding the efforts that have to be made to twist the bolts. By good, you need to remove the paint from the thread after dyeing.

    Helpful(0) Unhelpful(0)You have already voted this
  44. M***o

    Description very accurate. Printer is the one most wanted of the moment

    Helpful(0) Unhelpful(0)You have already voted this
  45. D***v

    Quality is super, delivery is very fast (from Russia)

    Helpful(0) Unhelpful(0)You have already voted this
  46. E***n

    The store did not deceive and really the printer came from Moscow. Order 11.11 in Samara received 17.11 early in the morning. The box is not crumpled, everything is perfectly packed. I will collect, test. Seller recommend

    Helpful(0) Unhelpful(0)You have already voted this
  47. A***v

    Month sent order, all asked to wait. In the course of China, the parcel went Janet. Mail printer from Moscow got to the Altai territory a little more than a week. immediately changed the drivers to tmc2209 and the extruder on the direct, it became faster and quieter, but the regular fans are screaming like a fool. And with the table, something I did not work out until I anointed bf2. After Anet A8 printer fire, but delivery just horror

    Helpful(0) Unhelpful(0)You have already voted this
  48. Customer

    good procuct

    Helpful(0) Unhelpful(0)You have already voted this
  49. A***a

    The printer went more than 2 months, but everything came intact, collected in 2 hours, works out of the box perfectly. I recommend the store, however, there is a newance for delivery: long… And it is difficult to track down, you need to constantly contact the seller.

    Helpful(0) Unhelpful(0)You have already voted this
  50. V***o

    A wonderful store! I am very pleased. With delivery from Russia, I received the parcel in 3 days to the nearest Moscow region. Printer liked. Sorry only two TMC 2208 drivers…

    Helpful(0) Unhelpful(0)You have already voted this
  51. V***v

    Ordered 12.10.20, received 12.11.20. Courier delivery to door. Packed perfectly. The store, at my request, did customs clearance of the goods. The quality of the printer itself is excellent, the seller is responsive, it is willing to contact. The thing is specific, who needs it, you can safely order here. 5 +!

    Helpful(0) Unhelpful(0)You have already voted this
  52. A***v

    Ordered a printer 11.11 at the very beginning of the sale. 17.11 printer was already with me. The quality of the printer on a solid 5 for this money, from an unpleasant-colored thread in the racks, before the assembly I had to go through the thread with a thrower.

    Helpful(0) Unhelpful(0)You have already voted this
  53. M***a

    It came quickly, everything works, collected according to the instructions

    Helpful(0) Unhelpful(0)You have already voted this
  54. V***s

    Delivery is very fast. Assembled, launched. Factory Sample printed on Hurray. My own-with variable success. However, what to want is my first printer and first experience. In general, very satisfied. The printer will require a little change. This, however, is warned in the forums in advance. Yes, and alterations for small things, not scary.

    Helpful(0) Unhelpful(0)You have already voted this
  55. A***v

    Thank you store! Packed perfectly! Very quickly! I will collect.

    Helpful(0) Unhelpful(0)You have already voted this
  56. M***v

    Packed perfectly. The printer itself did not produce the effect of wow, the only thing that it is silent drivers pleasantly pleased. The printer should be finished, with a lot of things, but the potential to make a professional device out of it is. The first time the assembly did not go perfectly, crispy bearings, apparently where it did not collect.

    Helpful(0) Unhelpful(0)You have already voted this
  57. I***v

    Brought from a warehouse in Russia on the 4th day, a box ideally, inside everything is neat: complete, without marriage, without damage. He gathered without problems, except that he incorrectly placed the lock of the screed on the X-motor on the right side of the carriage. From the box attached PLA printed test Bolt, XYZ calibration cube-everything is very decent, but: 1) obvious underextrusion 2) making. I guess this can be handled by adjustments. In idle mode, the false propositions of the optical end of the X axis are sometimes caught (expressed by chaotic sound generation from пьезопищалки). Compared to the first version-a huge step forward, just sky and earth. If it wasn’t for Dima Sorkin, I wouldn’t have decided to contact the bear for the second time. I do not regret it yet)

    Helpful(0) Unhelpful(0)You have already voted this
  58. V***n

    Ordered 11. 11. To Moscow came in 5 days. Collected from the box, without any dancing with a tambourine. In the kit there were not enough Springs for a cut sleeve along the z axis. For that two plastic bushings, which without a spring are useless)) except for this small shortage, everyone is happy.

    Helpful(0) Unhelpful(0)You have already voted this
  59. S***n

    Very fast shipment Moscow Region 3 days since payment.

    Helpful(0) Unhelpful(0)You have already voted this
  60. O***v

    You need another meter in the kit! Carving is practically not cut, in the rest, all the rules who order in Israel keep in mind the need for permission from misrad Tikshoret I have been his two weeks knocked out + 400 Shek for clearance and taxes

    Helpful(0) Unhelpful(0)You have already voted this
  61. V***o

    Everything is fine, collected and prints. Drivers TMS 2225 4 pieces, works quietly.

    Helpful(0) Unhelpful(0)You have already voted this
  62. N***v

    Delivered by courier of Russian mail to the door in 7 days. The printer collected everything for the evening, got a defective extruder channel for the rod was melted had to be drilled.

    Helpful(0) Unhelpful(0)You have already voted this
  63. A***h

    Got to Eben in the north of Komi in six days. First they gave out a track from China, but then sent from Russia as wanted. It’s nice when this is how it turns out.

    Helpful(0) Unhelpful(0)You have already voted this
  64. S***n

    Excellent! Works with box

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    FLYING BEAR Ghost 4S FDM Metal 3D Printer
    FLYING BEAR Ghost 4S FDM Metal 3D Printer

    $796.00 $493.00

    XPita
    Reset Password
    Compare items
    • Total (0)
    Compare
    0