- 30%

FYSETC Clone Prusa Mini 3d printer

(37 customer reviews)

$461.00 $321.00

  • This printer has come with a full color LCD display(2.8″/3.2″, 65k colors)
  • High quality powder steel plate, easy to print, easy to remove by bending and popping it off also easy to maintain
  • The standard 0.40mm nozzle is an excellent multifunctional solution but if you need highly detailed printing you can easily replace it with 0.25mm nozzle for a higher level of detail.
  • Clone Prusa mini uses high quality MW power supply, mature technology, stable power supply and safety guarantee. 160W max power is suitable for 100-240v environment and is convenient to use.
  • The reasonable design of the packaging makes the product more stable during transportation.

  Ask a Question
SKU: 4000935345664

$461.00 $321.00

(-30%)

In stock

Free Shipping

Get free shipping across the globe.

Affordable Pricing

Factory direct prices for maximum savings.

Premium Support

Pre & Post Sales customer support.

below atc
Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare

FYSETC Clone Prusa Mini 3d printer

Pre-order clone Prusa Mini 3d printer DIY full kit (not assembly)

Package:
screw kit 1
Tool kit 1
USB disk 1
Smooth rods kit 1
3030 extrusion kit 1
625 bearing 3
12.5mm, 3mm OD shaft 1
4.9*12mm shaft 1
16T GT2 Pulley(as MK3) 2
Flat Pulley(as MK3) 2
X/Y Gates belt 2
LM8UU 5
LM10LUU 2

Electronics
Motors kit 1
Buddy control board 1
Thermistor hotend 1
Thermistor heated bed 1
Filament sensor kit 1
heatedbed 1
heated bed cable 1
LCD (as choose) 1
24V 40w cartridge 1
PSU (as choose) 1
Minda 1
Fans 2
extruder gears 1
Hotend kit 1
Bowden tube 1
Y carriage 1
Z bottom plate 1
PEI sheet (sticker well on the stteel sheet) 2

the filament is not included
Mini 3d Printer DIY Full Kit And MW Power Suitable For Household Education UseMini 3d Printer DIY Full Kit And MW Power Suitable For Household Education UseMini 3d Printer DIY Full Kit And MW Power Suitable For Household Education UseMini 3d Printer DIY Full Kit And MW Power Suitable For Household Education UseMini 3d Printer DIY Full Kit And MW Power Suitable For Household Education UseMini 3d Printer DIY Full Kit And MW Power Suitable For Household Education Use

Mini 3d Printer DIY Full Kit And MW Power Suitable For Household Education UseMini 3d Printer DIY Full Kit And MW Power Suitable For Household Education UseMini 3d Printer DIY Full Kit And MW Power Suitable For Household Education UseMini 3d Printer DIY Full Kit And MW Power Suitable For Household Education UseMini 3d Printer DIY Full Kit And MW Power Suitable For Household Education UseMini 3d Printer DIY Full Kit And MW Power Suitable For Household Education Use

Additional Information: FYSETC Clone Prusa Mini 3d printer

Brand Name FYSETC
Model Number prusa mini
CE Certification Yes
Consumables Diameter 1.75mm
Bed Temp 100
Fliament ABS, PLA , PETG
Power Supply MW POWER
Voltage 110-220V
Nozzle Diameter 0.4MM
Auto Leveling YES
Maximum Print Size 180*180
Molding Technology 3DP

Shipping And Payment

 

Shipping:

There are two key factors which will affect the time you receive your items.

  1. Processing Time: After receiving your order, we need some time to test the product to ensure its quality. The exact processing time varies depending on the item. The average processing time is 3 working days. but this can also be affected by the item’s stock status. For small quantity orders, the processing time is 1-3days while larger quantity orders may take up to 2-5days.
  2. Shipping Methods:
WarehouseEstimated Shipping Time
US Warehouse3 – 9 Days
EU Warehouse3 – 11 Days
Australia Warehouse3 – 11 Days
China Warehouse6 – 15 Days

Payments: xPita.com accepts payments via all the secure methods. Such as PayPal, credit and debit card.

If you have any questions regarding the Shipping or Payments. Please contact us here.

37 reviews for FYSETC Clone Prusa Mini 3d printer

4.8 out of 5
31
6
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. P***o

    Very nice clone, I am wholy satisfied. So far no problems after initial calibrations. The assembly videos are a nice touch, but there were some mistakes (putting the extruder body upside down at the beginning of extruder assembly step) and few steps missing… I don’t know why some people complain about sleeve length, everything was fine for me (just don’t forget the video assembly tutorials in the description!)

    Helpful(0) Unhelpful(0)You have already voted this
  2. M***a

    product is great. works just like its supposed to

    Helpful(0) Unhelpful(0)You have already voted this
  3. K***n

    nothing missing , everything Come complete and shipping was awsome very quick , mini kit now assembled and performing nicely. good job

    Helpful(0) Unhelpful(0)You have already voted this
  4. A***e

    All perfect, eye that 3D pieces (plastic) are not included, after I got the printer home I realized they weren’t included and the store doesn’t report that detail, but on the other hand everything excellent

    Helpful(0) Unhelpful(0)You have already voted this
  5. M***A

    Produit très bien emballer et complet. Il me manque plus qu’a imprimé les éléments en pla et ma nouvelle imprimante sera n fonction. Juste deux petites remarque pour améliorer le service client: – ne pas attendre que le client envoie un message pour signaler un retard dans la livraison. – indiquer un numéro de suivi valide, car c’est le livreur qui m’a prévenu de la livraison Un client satisfait du produit mais un petit peu moins de la livraison.

    Helpful(0) Unhelpful(0)You have already voted this
  6. M***i

    Versand dauerte etwas lange, das Kit ist aber Qualitativ sehr hochwertig!

    Helpful(0) Unhelpful(0)You have already voted this
  7. D***n

    very impressed with the quality of the kit. the hot end came preassembled too which was nice. calibration wizard and first layer finished on the first try without any problems. completed my first print. amazing.

    Helpful(0) Unhelpful(0)You have already voted this
  8. Customer

    It’s for Christmas but everything is well packaged. Nickel.

    Helpful(0) Unhelpful(0)You have already voted this
  9. J***n

    Very good communication with the store, very nicely packaged and nice quality parts. Nothing to complain and the seller cannot do nor is responsible for the shipping delays. I am very happy with this purchase.

    Helpful(0) Unhelpful(0)You have already voted this
  10. D***g

    Buy this…. Not once, I mean twice.

    Helpful(0) Unhelpful(0)You have already voted this
  11. W***m

    It was a little difficult, but it succeeded in assembling and works well. Unfortunately, one of the Teflon tubes was missing, so I bought it from another shop and finished assembling it.

    Helpful(0) Unhelpful(0)You have already voted this
  12. A***z

    perfecto, funciona todo perfecto, e imprime con una calidad muy buena

    Helpful(0) Unhelpful(0)You have already voted this
  13. O***t

    Actually works fine. The bearings are a bit louder than on original Prusa, but work o.k. But be aware: Original Prusa Mini has all metal heatbreak, while clone uses 4.1 bore, so tube goes down to nozzle. No problem with PLA and PET-G. But original Prusa firmware allows up to 305°C before emergency shutdown (watchdog). On that temperature the tube in the clone would already degrade and release toxid fumes. So you should definitly adapt the firmware to max heatertemp of 255°C or change the clone heatbreak to an full metal one.

    Helpful(0) Unhelpful(0)You have already voted this
  14. Customer

    all OK

    Helpful(0) Unhelpful(0)You have already voted this
  15. D***k

    The delivery has been repeatedly postponed. If the package today not come would I my money back brought

    Helpful(0) Unhelpful(0)You have already voted this
  16. M***a

    Kit very complete. Includes filament detector

    Helpful(0) Unhelpful(0)You have already voted this
  17. C***t

    Vraiment ravi de ma commande, tout est bien empaqueter, chaque élément dans des sachets séparés avec les etiquettes, rien ne manque. prévoir 3 grosses heures pour le montage en prenant son temps. parfait a l’impression rien a dire. Bravo au vendeur qui répond rapidement en cas de questions.

    Helpful(0) Unhelpful(0)You have already voted this
  18. I***a

    Goods as described. Packing firm. Fast response and friendly communication. Would buy from here again!

    Helpful(0) Unhelpful(0)You have already voted this
  19. M***s

    Functional Kit

    Helpful(0) Unhelpful(0)You have already voted this
  20. C***s

    La impresora funciona muy bien, trae tornilleria de sobra, los ventiladores son silenciosos, el paquete llegó en perfecto estado

    Helpful(0) Unhelpful(0)You have already voted this
  21. Customer

    Product quality very good, as described, came with some spare screws etc too which is always useful + tools. Instructional videos were terrible though, I’d make sure you follow the PDF manual inside the FYSETC GitHub instead. Would like to have seen reference to this on the packaging, but not a big deal. Printer took some tweaking to get up and running but now prints as good as an original machine.

    Helpful(0) Unhelpful(0)You have already voted this
  22. N***c

    Good dealer, sends updates due to corona issues.. Everything OK.

    Helpful(0) Unhelpful(0)You have already voted this
  23. D***r

    First of all: Sorry Josef Prusa, but the delays in shipment and no kit beeing available did it for me. Now: This FYSETC kit for 200 bucks is just awesome. They use 3 slightly changed 3D printed parts. The instruction video was mostly fine but some steps were missing towards the end. I was supprised by the amount of spare parts and tools. The 2 minor problems I had, were the none present pins on the heated bed (which I fixed using 2 screws) and 22cm of missing 5mm(?!) mesh cable sleeve for the filament sensor (which I fixed some spare sleeve I had). Everything else was pretty much perfect. I also replaced there heat block sock and ptfe tube but just for the look. The orginal parts were fine. Waiting for my second one to arrive.

    Helpful(0) Unhelpful(0)You have already voted this
  24. D***r

    Excellent packaging, overall good quality and a lot of spare parts. However I had to order the original PTFE tube coupler from Prusa because, in opposite to the message of the manufacturer that the PTFE tube fits to the existing thread/drilling, it did not fit. I dont know how they came to this opinion, maybe they have tested an older iteration of the printed parts.. Anyway.. the original couplers + tube are not expensive, so not a big deal but meaned additional time of waiting.

    Helpful(0) Unhelpful(0)You have already voted this
  25. B***s

    Had to wait some time because it was a pre-order, very nice contact.

    Helpful(0) Unhelpful(0)You have already voted this
  26. D***t

    I am very happy about a clone and think that it makes little difference in terms of the print quality of the original. But of course you shouldn’t expect high quality parts for the price, especially for motors, PEI sheets and LM8UU / LM10LUU bearings. I can’t say much about the buddy control card except that it does its job and is currently working fine with FW 4.2.0. Oh yes, there were still enough screws and nuts left, only the 22 cm long textile tube of the IR sensor was missing and the sensor seems to be very different from the original, so that the MINI fsenzor box (printed) cannot be installed.

    Helpful(0) Unhelpful(0)You have already voted this
  27. Customer

    I was relieved that more screws than required were included. Extruder peg has a different size than the printed hole. There was no filament-sensor Teflon tube.

    Helpful(0) Unhelpful(0)You have already voted this
  28. J***R

    Perfect. Not yet mounted but the quality is at the rendezvous. Thank you very much.

    Helpful(0) Unhelpful(0)You have already voted this
  29. G***L

    Delivery we can not faster from warehouse Spain to France! I am pleasantly surprised ….. the various exchanges we have maintained with the store are very good. Parcel not really unpacked yet but the kit seems complete and very well done. Thank you

    Helpful(0) Unhelpful(0)You have already voted this
  30. A***o

    Still and the shipping problems, in the end everything is perfect. Good communication with the store always very kind. Of qualities is fine, according to the precious.

    Helpful(0) Unhelpful(0)You have already voted this
  31. A***s

    The printer arrived in good condition and as described on the annotation more than to mount it

    Helpful(0) Unhelpful(0)You have already voted this
  32. R***i

    Fantastic printer

    Helpful(0) Unhelpful(0)You have already voted this
  33. U***r

    Very happy

    Helpful(0) Unhelpful(0)You have already voted this
  34. Customer

    Lo consiglio, mantengolno la parola data!

    Helpful(0) Unhelpful(0)You have already voted this
  35. V***i

    Clone prusa mini arrived. Everything looks fine – I’m going to assemble. I recommend!

    Helpful(0) Unhelpful(0)You have already voted this
  36. R***s

    Really good quality product. Only downside is that the MAC address wasn’t assigned yet. After contacting the store I got the description and hex file to assign the MAC address. Happy with the printing quality!

    Helpful(0) Unhelpful(0)You have already voted this
  37. Customer

    Nicely packaged

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    FYSETC Clone Prusa Mini 3d printer

    $461.00 $321.00

    Have Any Questions? Talk to our support team here.

    XPita
    Logo
    Reset Password
    Compare items
    • Total (0)
    Compare
    0
    Shopping cart