Mini Laser CNC Machine For Leather/Bones/Stone/Paper/Outer Casing
$218.03 – $462.38
- Cushioning A Antiskid Plastic Pad
- Bluetooth And USB Port
- Double Vslot Pulley Line
- Aluminum Alloy And Acrylic Material
- Suitable For Wood/Plastic/PCB/Acrylic/Plywood
$218.03 – $462.38
Free Shipping
Get free shipping across the globe.
Affordable Pricing
Factory direct prices for maximum savings.
Premium Support
Pre & Post Sales customer support.

Related Products
Mini Laser CNC Machine For Leather/Bones/Stone/Paper/Outer Casing
product parameters
working area |
30x18x4.5cm |
Frame size |
33x40x24cm |
Mesa |
30x18cm |
Spindle |
775 spindle motor (12-36V) 24V: 10000r/min
|
Spindle Chuck |
ER |
Step motor |
Fuselage length 34MM,Current 1.33A, 12v.Torque 0.25N/M |
Power supply |
24V 5.6A |
Software |
GRBL controller |
supported system |
Windows(Do not support Mac)
|
Drill bits |
tip 0.1mm ,20 degree , diameter3.175mm.the package includes 10pc |
Laser |
500mw 405nm, 12v 2500mw 450nm, 12v 5500mw 450nm |
clamps |
4 pcs, Hold the thickness of 0-30mm,size: 50 * 20 * 3 (length * width * thick), the inner slot width 6mm |
Important reminder
1. Three-axis engraving: wood, plastic, PCB, acrylic, plywood, etc.
2. Laser engraving: wood, plastic, leather, bones, stone, paper, outer casing, etc.
3. We have a 10w laser that can engrave metal materials such as stainless steel and alumina.
4. The blade can be engraved with plastic, wood, acrylic, pvc, PCB, wood or similar material
5. The offline controller supports offline work, you do not need to connect to the computer
7. We have EU and US adapters and I will send the correct plugs according to your country.
About cnc 3018 software :
(you can get it through these three methods)
1. The engraving machine we sent is equipped with a U disk, which contains 3018pro software and installation instructions.
1, improved power interface: the original plastic interface changed to all metal shielded interface.
2, perfect USB interface: the original USB interface is patch soldering, collision and improper use during transportation, easy to drop, now it is plug-in type, very strong.
3, the spindle drive increases the isolation of the optocoupler, so that the control board generates less heat, the spindle speed adjustment is more linear and safe.
4. Replace the stepper motor driver with the DRV8255 for faster speed and better quality.
5. The stepper motor driver adds a self-recovery fuse. When a short circuit or fault occurs, the power will be cut off and the fault indicator will be displayed.
6,12V step-down increase the self-recovery fuse, when a short circuit occurs, the power can be cut off in time to avoid damage.
7, optimize the layout, the control area is separated from the drive area, and the operation is more stable.
8, increase the plastic protective cover to avoid short circuits.
9, increase the heat sink to avoid burning the control panel.

The advantage of this 3018 machine?
1. no need to locate all places, assembly difficulty is greatly reduced, and precision is high
2 no corner pieces, one-piece molding, no error.
3 base height 4 cm,high strength,high stability.
4 positioned when installing the motor, no adjustment required.
5. The structure is stable, the appearance is simple, and the assembly difficulty is reduced. Now the 3018Pro machine only takes about 20 minutes to complete the assembly.
Specification: Mini Laser CNC Machine For Leather/Bones/Stone/Paper/Outer Casing
|
User Reviews
Be the first to review “Mini Laser CNC Machine For Leather/Bones/Stone/Paper/Outer Casing” Cancel reply

$218.03 – $462.38
There are no reviews yet.