Three kinds of material：
1. LCD style Resin：LCD-E / LCD-T / LCD-W / LCD-N /LCD-C five style.
500g/bottle(all color clear except LCD-N gray)
Be applicable: curing between 355-420nm
2. Five colors paste：10g/bottle*5.
(Mixing Resin color, all suitable)
3. Black smooth bottle Resin: 500ml/bottle.
Be applicable: most of DLP/LCD/SLA 3D Printercuring 405nm(include any cubic photon)
If you find that the resin is not suitable, please adjust it to the appropriate parameter range
according to the parameters of your 3d printer.
Black smooth bottle Resin parameter:
Hardness: 79 D
Viscosity(25℃): 552 mpa.s
Curing wavelength: 405 nm
Liquid density: 1.1
Solid density: 1.184 g/cm⊃3;
Tensile strength: 23.4 Mpa
Curing time: 6-10 s
Elongation at break: 14.2%
Color: black / white / gray / yellow / red / skin / orange / clear green
clear yellow / clear / maroon
Shelf life: 1 year
Be applicable: most of DLP/LCD/SLA 3D Printer(include any cubic photon)
Terms and Conditions:
Shake well before use, please wear a glove mask, the recommended temperature 20-25 ℃, to avoid dust and the environment.
This product can not be taken orally. Keep away from children. Do not enter the eyes. In case of accidental contact, flush with plenty of water as soon as possible. If not, consult a doctor promptly.
It is recommended to store at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed, dusty, or damp, affecting print quality. Shading preservation, the sun contains a lot of ultraviolet light, will cure the photosensitive resin.
Delivery time note:
Most countries can reach customer destinations in 18-21 days, and shipping templates are only available for remote countries.
Specification: Sparkmaker 3D Filament UV Resin for LCD/SLA 3D Printer/3D Printing Materials
$53.55 – $220.19