- 26%

Two Trees Sapphire Plus Core XY

(57 customer reviews)

$788.00 $583.00

  • Upgraded Version:Full metal body with large printing size 300mm*300mm*350mm.Sensitive touch screen brings smooth touch experience save time and worry.
  • Frosted Hot Bed Film:The hot bed can be reused,refuses to warp,easy to take the mold and does not need glue textured paper.
  • Resume Printing Function:Monitor supplies at any time for filament.Electrical power is lost,print can be resumed from the last layer.
  • Filament Sensor:Auto warning if filament runs out or break.Intelligence help to save time and filament.
  • Filament Sensor:Auto warning if filament runs out or break.Intelligence help to save time and filament.

  Ask a Question
SKU: 4000640565284

$788.00 $583.00

(-26%)

In stock

Free Shipping

Get free shipping across the globe.

Affordable Pricing

Factory direct prices for maximum savings.

Premium Support

Pre & Post Sales customer support.

below atc
Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare

Two Trees Sapphire Plus Core XY

  • Upgraded Version:Full metal body with large printing size 300mm*300mm*350mm.Sensitive touch screen brings smooth touch experience save time and worry.
  • Frosted Hot Bed Film:The hot bed can be reused,refuses to warp,easy to take the mold and does not need glue textured paper.
  • Resume Printing Function:Monitor supplies at any time for filament.Electrical power is lost,print can be resumed from the last layer.
  • Filament Sensor:Auto warning if filament runs out or break.Intelligence help to save time and filament.
  • Filament Sensor:Auto warning if filament runs out or break.Intelligence help to save time and filament.

TWO TREES 3D Printer With Filament Sensor And Power Parameter DisplayTWO TREES 3D Printer With Filament Sensor And Power Parameter DisplayTWO TREES 3D Printer With Filament Sensor And Power Parameter DisplayTWO TREES 3D Printer With Filament Sensor And Power Parameter DisplayTWO TREES 3D Printer With Filament Sensor And Power Parameter DisplayTWO TREES 3D Printer With Filament Sensor And Power Parameter DisplayTWO TREES 3D Printer With Filament Sensor And Power Parameter DisplayTWO TREES 3D Printer With Filament Sensor And Power Parameter DisplayTWO TREES 3D Printer With Filament Sensor And Power Parameter DisplayTWO TREES 3D Printer With Filament Sensor And Power Parameter DisplayTWO TREES 3D Printer With Filament Sensor And Power Parameter DisplayTWO TREES 3D Printer With Filament Sensor And Power Parameter DisplayTWO TREES 3D Printer With Filament Sensor And Power Parameter Display

Additional Information: Two Trees Sapphire Plus Core XY

Brand Name TWO TREES
Model Number Sapphire Plus
CE Certification Yes
Consumables Diameter 1.75mm
Printing Speed 120mm/s
Bed Temp 100
Slice Thickness 0.1
Maximum Printing Speed 300mm/s
Interface Type SD
Color Print Speed 30-300mm/s
Fliament PLA, ABS, PETG, Wood
Slice Software "Cura/Simplify3D/Pronterface/ Repetier-Host/Makerware"
Maximum Working Speed 1000mm/s
Precision ±0.01mm
Voltage 110-220V
Operating System Windows, MAC
File Format STL, OBJ, JPG
Nozzle Diameter 0.4mm
Diameter Temp Nozzle: 200°
Auto Leveling YES
Maximum Print Size L300*W300*H350mm
Molding Technology FDM
Hot Bed Size 310x310mm
Manufacturer ShenZhen TWO TREES Technology Co., Ltd
Language EN, RU, ES, FR, IT, ZH-CN, ZH-HK
Power supply 220V/110V 360W
Working environment Temperature: 5-40 ° C, humidity: 20-60% RH
Extrusion head temperature (MAX) 260 ° C
Hot bed maximum temperature (MAX) 100 ° C
Printing method TF card/online printing (PC)
Layer thickness 0.1-0.4mm
XY axis positioning accuracy 0.01mm
Z axis positioning accuracy 0.04mm
Package weight 20kg
Machine material Sheet metal
Number of nozzles 1

Shipping And Payment

 

Shipping:

There are two key factors which will affect the time you receive your items.

  1. Processing Time: After receiving your order, we need some time to test the product to ensure its quality. The exact processing time varies depending on the item. The average processing time is 3 working days. but this can also be affected by the item’s stock status. For small quantity orders, the processing time is 1-3days while larger quantity orders may take up to 2-5days.
  2. Shipping Methods:
WarehouseEstimated Shipping Time
US Warehouse3 – 9 Days
EU Warehouse3 – 11 Days
Australia Warehouse3 – 11 Days
China Warehouse6 – 15 Days

Payments: xPita.com accepts payments via all the secure methods. Such as PayPal, credit and debit card.

If you have any questions regarding the Shipping or Payments. Please contact us here.

57 reviews for Two Trees Sapphire Plus Core XY

4.9 out of 5
52
5
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. S***s

    As expected, very quick delivery within the EU 🙂

    Helpful(0) Unhelpful(0)You have already voted this
  2. P***r

    + Great printer with very stable case, moving parts have no play + BLTouch Probe for Autobedleveling + Case was grounded well + No missing or damaged parts Things to improve: – Documentation is bad, small pictures and little description of assembly steps – Cable for BLTouch probe is to short – No mount for filament runout detector – Old board MKS Robin Nano V1.2 -> upgrade to MKS Robin Nano V2 would be nice – Wiring is not very clean – Closedsource firmware, Opensource firmware would allow to extend the printer – Basic hotend. – Mounts for other common hotends would be nice

    Helpful(0) Unhelpful(0)You have already voted this
  3. E***v

    Delivered by IML. There were no problems on delivery. T. K. This is my first printer, picking up a day and a half, and then a day tried to figure out, why the Extruder does not dare to feed plastic for printing. It turned out that the fig contact on one of the pins of the cable going to the motor of the extruder. Reconnect helped, the quality as a whole I liked. I’ll figure it out.

    Helpful(0) Unhelpful(0)You have already voted this
  4. C***s

    At first I didn’t want to print something from the software but they provided me. Attention after a while was arranged very good attention by the recommended store

    Helpful(0) Unhelpful(0)You have already voted this
  5. V***m

    Delivery is very fast. The printer collected in less than two hours, prints well. The printer comes with PLA, you can immediately test.

    Helpful(0) Unhelpful(0)You have already voted this
  6. G***v

    Great. thank you to the store. Got from Russia

    Helpful(0) Unhelpful(0)You have already voted this
  7. P***v

    Lovely machine

    Helpful(0) Unhelpful(0)You have already voted this
  8. P***v

    Received models, the quality is good.

    Helpful(0) Unhelpful(0)You have already voted this
  9. V***v

    That’s great. Everything works fine!

    Helpful(0) Unhelpful(0)You have already voted this
  10. V***v

    The printer is perfect. The installation is very simple and the rendering of prints is great.

    Helpful(0) Unhelpful(0)You have already voted this
  11. V***v

    All OK. Shipping fast. Recommend

    Helpful(0) Unhelpful(0)You have already voted this
  12. I***v

    The Sapphire plus printer works fine. I am very pleased with my order.

    Helpful(0) Unhelpful(0)You have already voted this
  13. Z***v

    I like it, I recommend it!

    Helpful(0) Unhelpful(0)You have already voted this
  14. F***v

    Arrived in 3 days! Very well packed. Excellent printer quality/price. I recommend replacing the Pei surface, better grip.

    Helpful(0) Unhelpful(0)You have already voted this
  15. T***v

    Super mega fast!

    Helpful(0) Unhelpful(0)You have already voted this
  16. A***v

    I am happy with the store

    Helpful(0) Unhelpful(0)You have already voted this
  17. V***v

    The installation takes two hours, but everything is fine, it works fine. Great!!!!

    Helpful(0) Unhelpful(0)You have already voted this
  18. V***n

    Printer actual! It took some time to figure out how to assemble it, but it’s OK

    Helpful(0) Unhelpful(0)You have already voted this
  19. V***v

    Hello, everything matches the description, everything is in place!

    Helpful(0) Unhelpful(0)You have already voted this
  20. I***v

    Super) rides easily. The instruction is detailed. Packed qualitatively. The truth is not really printed, because the table needs to be adjusted, but I think there will be no problems with this. I’m happy. ))) I recommend)

    Helpful(0) Unhelpful(0)You have already voted this
  21. Y***p

    100% precision. Works fine

    Helpful(0) Unhelpful(0)You have already voted this
  22. E***v

    My first 3D printer. I am very pleased with the amazing printing quality. It’s worth every dollar. I’ll be back later with prints photos.

    Helpful(0) Unhelpful(0)You have already voted this
  23. I***n

    The store responded very quickly and sent the printer in a few hours.

    Helpful(0) Unhelpful(0)You have already voted this
  24. R***u

    This is my first 3d printer, assembly took roughly 6 hours, some parts (bottom housing) came with a small dent, fixed easily with pliers, screw railings which move Z axis came unlubed so require a bit of grease applied. Z axis endstop mount is supposed to attach with 2 screws, in reality the width isn’t correct so you can only install one screw. However these parts don’t bear any load so it isn’t an issue. What was an issue though, is bed height. When Z axis is in its top position, by default there’s about a 1 cm gap between the bed and the nozzle, obviously impossible to print like this. Had to get longer screws to attach the bed onto, oversight on manufacturer’s side. Included assembly manual is a bit lacking but overall the assembly is pretty self-explanatory, no issues there. Print quality is good.

    Helpful(0) Unhelpful(0)You have already voted this
  25. Customer

    The printer is essentially a good set of mechanics. No more. Requires serious improvements. The firmware must be changed, a blue sticker on the table in the dump. Corners with ends and you need to straighten. Heating the table should be done through the relay from 220 V. Blowing the details to redo. Clinging print. The frame has to be signed. Rollers cling to the profile. Z-axis ends for more accurate replacement. I found it in a week.

    Helpful(0) Unhelpful(0)You have already voted this
  26. A***v

    Everything is fine, very missing ultrabase. Native sticker is not about what. Stitched on Marlin 2.0 immediately and replaced all the drivers

    Helpful(0) Unhelpful(0)You have already voted this
  27. R***o

    I expected more from this 3d printer. Overall, its a good buy, dont get me wrong, but it has some issues: Z axis switches are poorly placed, I had to bend the little metal plate in them because if not, the bed crashes with the holder. The extruder is the same as the Pro, you can print, but a future upgrade to a Mosquito or V6 is a must. Silenced drivers are missing, so upgrading to 2208/2209 is another must (4€ each). That corrugated tube is disgusting, now cables are already on, wich is a good point, but the heat bed cables have a proper cover, wich the extruder could also have, but its not the case. In my case, teflon tube was too bended, so I’ll have to change it over time. It might seem that I hate this printer, but its not the case, I like it, but issues are inevitable.

    Helpful(0) Unhelpful(0)You have already voted this
  28. R***y

    Bought on November 11 with delivery from Russia, plus in the same order added needles for cleaning the nozzle. The printer was brought on November 19th, the needles came from China on the 28th, quickly! The printer is cool, compared to дрыгостолами (I have this), the kinematics are fast, all models are 150 mm/s printed. Not without jambs, but I’m still learning) plastic PLA, SBS, SBS-PRO On the bottom of the table did not get a box with a diaphragm, and on this it turned out here, I’m happy. On the firmware that was in the drain-the movement control did not work and did not work, but on the flash drive from the kit was found and working firmware and a bunch of all useful. There is a jamb with hotend, from the slot between the radiator and the thermal chamber slowly but correctly flows plastic (5 photos), can get on the model, what to do with it-it’s not clear

    Helpful(0) Unhelpful(0)You have already voted this
  29. J***e

    Well received

    Helpful(0) Unhelpful(0)You have already voted this
  30. N***v

    Very fast delivery, excellent quality. Recommend 100%

    Helpful(0) Unhelpful(0)You have already voted this
  31. P***v

    With delivery in Russia 3 days. Printer works OK

    Helpful(0) Unhelpful(0)You have already voted this
  32. T***y

    Everything works. It is easy to assemble

    Helpful(0) Unhelpful(0)You have already voted this
  33. V***v

    Very fast shipping! Printing quality is good. Highly recommend

    Helpful(0) Unhelpful(0)You have already voted this
  34. T***n

    Prints well, need better cooling parts

    Helpful(0) Unhelpful(0)You have already voted this
  35. Y***v

    They delivered it in three days. Everything is fine, an excellent printer, it works quietly. Very satisfied

    Helpful(0) Unhelpful(0)You have already voted this
  36. V***v

    Fast delivery, in working condition

    Helpful(0) Unhelpful(0)You have already voted this
  37. T***v

    Luxurious. With beautiful prints

    Helpful(0) Unhelpful(0)You have already voted this
  38. P***v

    Very good buy

    Helpful(0) Unhelpful(0)You have already voted this
  39. F***v

    All in good condition

    Helpful(0) Unhelpful(0)You have already voted this
  40. T***v

    Fast delivery, the goods are very good quality. Great store

    Helpful(0) Unhelpful(0)You have already voted this
  41. V***v

    You need to make a firmware, but in general it’s normal. Collected in an hour

    Helpful(0) Unhelpful(0)You have already voted this
  42. V***v

    Ordered 11.1 received 19.11. Two drivers of quiet, two noisy. In an hour I collected

    Helpful(0) Unhelpful(0)You have already voted this
  43. A***v

    Everything is perfectly packed, on the package stickers with the description of the contents, on the YouTube channel detailed assembly instructions. The only negative fan came cracked. The store promised to send a new one.

    Helpful(0) Unhelpful(0)You have already voted this
  44. P***v

    Delivery in a week. Quality on default settings is normal

    Helpful(0) Unhelpful(0)You have already voted this
  45. P***v

    Came, I’m happy with the purchase, the track did not serve

    Helpful(0) Unhelpful(0)You have already voted this
  46. P***v

    With delivery in Russia three days. The printer works OK, only need to customize

    Helpful(0) Unhelpful(0)You have already voted this
  47. P***n

    Everything is on top. Ordered 11.11, delivered in five days. Collected and configured, everything works

    Helpful(0) Unhelpful(0)You have already voted this
  48. T***a

    Works fine

    Helpful(0) Unhelpful(0)You have already voted this
  49. N***a

    Best printer for beginners, easy to operate

    Helpful(0) Unhelpful(0)You have already voted this
  50. M***a

    Excellent printer, the flash drive is not included in the kit, many people break down and whitmen also stopped working

    Helpful(0) Unhelpful(0)You have already voted this
  51. K***a

    Very good printer and service

    Helpful(0) Unhelpful(0)You have already voted this
  52. M***a

    Fast shipping. Good Goods at good price

    Helpful(0) Unhelpful(0)You have already voted this
  53. K***a

    Came in two weeks

    Helpful(0) Unhelpful(0)You have already voted this
  54. L***a

    Excellent printer, quality on the level, everything is like

    Helpful(0) Unhelpful(0)You have already voted this
  55. H***r

    I have now found out that there are different versions of the Sapphire Plus. This was nowehere mentioned. Mine version has no sync-belt between the two z-axis and no 3D touch sensor.

    Helpful(0) Unhelpful(0)You have already voted this
  56. M***i

    Came after 5 days to Mo (ordered with delivery from Russia), through the IML delivery service. Perfectly packed, but the quality of the parts leaves much to be desired… As an example, two rails (out of five) are problematic (one side and one top). In general, a typical Chinese “almost ready” printer. Bought-disassembled-lubricated/changed the details-collected, and maybe then it will work. I took this model solely because of the love of rails and for alteration. If you need printer without extra. Attachments of money and time-I advise you to choose another model.

    Helpful(0) Unhelpful(0)You have already voted this
  57. Customer

    Manual is stale, but unique two drive video complemented by Zoom.

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    Two Trees Sapphire Plus Core XY

    $788.00 $583.00

    Have Any Questions? Talk to our support team here.

    XPita
    Logo
    Reset Password
    Compare items
    • Total (0)
    Compare
    0
    Shopping cart