ZONESTAR Triple-Extruder Hotend with 3-IN-1-OUT/3-IN-2-OUT/3-IN-3-OUT Nozzles as 3D Printer Parts

Description:
What’s the difference between 3-IN-1-OUT, 3-IN-2-OUT, 3-IN-3-OUT hotend:

3-IN-1-OUT hotend: There are three filament input channels and only one nozzle, all of three color filament will be mixed in the hotend and outflow from one nozzle.

3-IN-3-OUT hotend: There are three filament input channels and three nozzles, each filament has its own independent melting and outflow channel, they are not be mixed.

3-IN-2-OUT hotend: There are three filament input channels and two nozzles, one of the filaments has its own independent melting and outflow from one nozzle, the other two filaments are mixed in the hotend and outflow from another nozzle. This type of hot end can meet the needs of mixing color and printing different kinds of materials at the same time.

NOTE:

1. MUST add a cooling fan to cool the heatsink of hotend, if its temperature is over 65 ℃ for a while, maybe cause it to be clogged.

2. For the hot end of multi-nozzle, it must be carefully adjusted to keep the nozzle at the same height，otherwise it will cause printing fault.

Options :

M3 Hotend 1 set 3-IN-1-OUT Mix Color Hotend

M3 Hotend 24V 1 set 3-IN-1-OUT Mix Color Hotend, assembled 24V/50W heating cartridge and temperature sensor

R3 hotend 24V 1 set 3-IN-3-OUT Hotend, assembled 24V/50W heating cartridge and temperature sensor

M2P1 hotend 24V 1 set 3-IN-2-OUT Hotend, assembled 24V/50W heating cartridge and temperature sensor